Light
Light is electromagnetic radiant energy composed by millions and millions of photons.
Photons
A photon is a quantum (small particle) of light that has: a position (where it is); a direction (where is moving to); and behave both as a particle and as waves. A photon has a frequency, f, and a wavelength, λ (measure in nanometers). The energy q of a single photon is:
q = h . f
where
f = c / λ
and c is the speed of the photon in the medium where it is moving. c is most of the time the speed of light. And h is Plank's constant (6.63 × 10-34).
Spectral Energy
In order to calculate the total general energy Q, we can sum the energy of every photon (in a beam of light, for example). That's very straightforward. But in graphics that's not the energy we use. Instead we use the spectral energy (Qλ) which is the energy in a given interval of wavelengths divided by the size of such interval. I mean:
Qλ = Q[a, b] / (b - a)
Where Q[a, b] is the total energy Q in the interval of wavelengths [a. b]. For example, a wavelength interval could be [400 nm, 500 nm] and the size of that interval is 100 nm. The spectral energy is a density of the energy along a wavelength. Its units are Joules (which is the unit of energy) times nm-1.
In graphics (because we use it a lot) we call the spectral energy simply energy. So Qλ we call it just Q, although we know is not the same. From now on I'll refer to spectral energy as energy.
Power
Power, Φ, is energy (spectral energy) per second. Its units are: J . sec-1 (we are omitting the nm-1 factor to make it simpler). Which is the same as Watts (W).
For example, a light bulb could produce 100 W of power.
Irradiance
Irradiance, E, is the amount of power per unit area. This is a good way to answer the question: How much light does hit this surface?. Its units are: W . m-2
So let's suppose there is a beam of light coming from a bulb in your room and you want to calculate the irradiance in an imaginary plane perpendicular to this beam of light. This will tell us how much energy passes through this plane in one second per unit area. We calculate E in this way:
Total Power Passing Through the Imaginary Plane
Total Area of the Imaginary Plane
On the other hand, let's suppose we want to calculate how much energy hits our desktop surface in a given time. But our desktop surface is not perpendicular to the beam of light. It has an non-zero theta angle between the direction of the beam of light and the normal of the desktop surface. In this case, the irradiance would be:
Total Energy Hitting Our Desktop Surface
Cos(theta) . (Our Desktop Total Surface Area)
Exitance
Exitance, M, is like Irradiance but the energy is leaving the surface (not hitting it). Its units are also: W . m-2
Exitance help us answer questions like: How much light is reflected from this surface?
Radiance
Irradiance give us an idea of how much light hits a surface in a second. But what if we want to know how much of that light (which is hitting the surface) comes from a given set of directions. For example, check out figure 1. In this we have light that is coming from many directions (from left to right) and is hitting the surface. We also have an imaginary cone that represents the set of directions of light that we’re interested in this example. So we don’t care about the other light that is hitting the surface, we just care about the one that is coming from the imaginary cone. To calculate how much of this light hits the surface we use Radiance.
Figure 1
Radiance, L, is Irradiance per unit solid angle (steradians) if the light is hitting the surface. If the light is leaving the surface, then Radiance is Exitance per unit solid angle.
L = Irradiance (E )
Total Solid Angle
or
L = Exitance (M )
Total Solid Angle
Its units are: W . m-2 . sr-1
No comments:
Post a Comment